This manual provides essential guidance for installing, operating, and maintaining your State Select Water Heater, ensuring safety, efficiency, and optimal performance while complying with local codes and manufacturer recommendations.
1.1 Overview of the Manual
This manual serves as a comprehensive guide for State Select Water Heater users, detailing installation, operation, maintenance, and troubleshooting. It includes essential safety precautions, technical specifications, and warranty information. Designed for both residential and commercial use, the manual ensures users can optimize their water heater’s performance while adhering to safety standards and manufacturer recommendations.
1.2 Importance of Reading the Manual
Reading the manual is crucial for safe and efficient operation of your State Select Water Heater. It provides critical safety warnings, installation guidelines, and maintenance tips to prevent accidents and ensure optimal performance. Understanding the manual helps users avoid potential hazards, comply with local regulations, and maximize the longevity of the appliance, ensuring a safe and reliable water heating experience for years to come.
Key Features and Benefits of State Select Water Heaters
State Select Water Heaters offer energy efficiency, advanced FVIR design, and compliance with safety standards like ANSI Z21.10.1-CSA 4.1, ensuring reliable and safe operation for years.
2.1 Energy Efficiency and Performance
State Select Water Heaters are designed with energy efficiency in mind, offering superior performance through advanced insulation and heat retention systems. These features minimize energy loss, ensuring consistent hot water delivery while reducing operational costs. The heaters are built to meet high efficiency standards, making them an eco-friendly choice for homeowners seeking long-term savings and reliable service. Additionally, their robust construction ensures durability and optimal performance over time.
2.2 Design and Technology
State Select Water Heaters incorporate cutting-edge technology, including advanced controls and durable materials, to deliver a reliable and efficient water heating experience. Their sleek designs are built with user-friendly interfaces, allowing for easy monitoring and adjustments. The integration of FVIR technology ensures compliance with safety standards, while the robust construction guarantees long-lasting performance and reduced maintenance needs over the product’s lifespan.
2.3 Safety Features
State Select Water Heaters are equipped with advanced safety features, including FVIR technology, which prevents flammable vapor ignition. They also feature thermal cutoffs and pressure relief valves to prevent overheating and excessive pressure. The units are designed with lead-free materials for safe water quality and include clear warning labels for operational guidance. Additionally, digital diagnostics provide real-time monitoring, ensuring safe and reliable performance while safeguarding users from potential hazards.
Safety Guidelines and Warnings
State Select Water Heaters feature FVIR technology, resisting flammable vapor ignition. They include thermal cutoffs and pressure relief valves to prevent overheating and excessive pressure, ensuring safe operation.
3.1 General Safety Precautions
Always follow these guidelines to ensure safe installation and operation of your State Select Water Heater. Install the heater indoors in a centralized location to minimize leaks and damage. Ensure proper drainage provisions, as all water heaters will eventually leak. For California installations, brace or anchor the heater to prevent earthquake damage. Avoid placing the heater in areas prone to flooding or near flammable materials. Proper venting is essential to prevent carbon monoxide risks. Never attempt installation without following the manual or local codes. Ensure only qualified professionals handle electrical and gas connections to avoid hazards. Regularly inspect the heater and its components for signs of wear or damage. Failure to comply with these precautions may result in injury, property damage, or void the warranty. Always adhere to safety warnings and instructions provided in the manual and on the appliance. If unsure about any step, consult a licensed professional for assistance.
3.2 Potential Hazards and Solutions
Potential hazards include carbon monoxide risks from improper venting, scalding from high temperatures, and leaks causing water damage. To mitigate these, ensure proper venting, set the temperature below 120°F, and install drainage pans. Regularly inspect for leaks and corrosion. In earthquake-prone areas, secure the heater to prevent tipping. Always follow the manual’s safety guidelines and address issues promptly to avoid accidents and ensure safe operation.
Installation Instructions
Select a centralized indoor location, ensure compliance with local codes, proper venting, and drainage. Follow manual instructions for secure installation and optimal performance.
4.1 Pre-Installation Requirements
Ensure the location is indoors, centralized, and complies with local codes. For California, bracing is required to prevent earthquake damage. Verify proper venting according to standards and ensure drainage provisions to avoid water damage. Check electrical and gas connections for compatibility. Clear the area of flammable materials and ensure the space meets all safety and regulatory requirements before proceeding with installation.
4.2 Step-by-Step Installation Process
Unpack and inspect the water heater for damage. Place it in the prepared location, ensuring level positioning. Connect water inlet and outlet lines securely. Attach gas and electrical connections according to the manual. Install venting systems as specified. Test for gas and water leaks. Ensure all safety features are activated. Follow the manufacturer’s instructions for final connections and system testing to ensure proper operation and compliance with safety standards.
4.3 Venting and Placement Considerations
Ensure the water heater is placed indoors, centrally located near water piping to minimize heat loss. Provide adequate drainage to prevent damage from eventual leaks. For California installations, the unit must be braced or anchored to resist earthquake movement. Follow venting requirements, using approved materials and ensuring proper clearance. Adhere to local codes and manufacturer guidelines for vent pipe type, length, and placement to ensure safe and efficient operation.
Operating the State Select Water Heater
Operating your State Select Water Heater involves understanding its electronic control system for safe and efficient use, monitoring settings, and adjusting temperatures as needed for optimal performance and compliance with safety standards.
5.1 Understanding the Control System
The State Select Water Heater features an advanced electronic control system designed for precise temperature management and energy efficiency. This system includes user-friendly controls and digital displays for easy monitoring. It ensures optimal performance by automatically adjusting settings based on demand, while built-in safety features prevent overheating and potential hazards. Additionally, the control system integrates with the iCOMM Connectivity Platform, allowing remote monitoring and adjustments for enhanced convenience and energy savings. Proper understanding of these controls is essential for safe and efficient operation.
5.2 Setting the Temperature
The State Select Water Heater allows you to set the temperature between 100°F and 180°F using the digital control panel. The factory preset is typically 120°F, but adjustments can be made based on your needs. Use the arrow buttons to increase or decrease the temperature. Ensure the setting complies with local codes and safety guidelines to avoid scalding risks; Always refer to the manual for detailed instructions on temperature adjustment and energy-efficient recommendations.
5.3 Monitoring and Adjusting Settings
Regularly monitor the water heater’s settings via the digital control panel to ensure optimal performance. Adjust temperature and operation modes as needed to balance comfort and energy efficiency. Refer to the manual for guidance on troubleshooting common issues and making adjustments. Periodic checks help maintain reliability and extend the lifespan of your State Select Water Heater, ensuring it operates within safe and efficient parameters at all times.
Maintenance and Care
Regular maintenance ensures optimal performance and longevity of your State Select Water Heater. Check for leaks, inspect the anode rod, and ensure proper ventilation to maintain efficiency and safety.
6.1 Routine Maintenance Tips
Perform regular checks on temperature settings, pressure relief valves, and anode rods to prevent corrosion. Ensure proper ventilation and drainage to avoid damage. Inspect the venting system annually for blockages. Flush the tank every 6-12 months to remove sediment buildup, which improves efficiency. Always follow manufacturer guidelines to maintain warranty validity and ensure safe operation.
6.2 Troubleshooting Common Issues
Common issues include no hot water, insufficient hot water, or leaks. Check power supply and thermostat settings for no heat. Insufficient hot water may require adjusting temperature or inspecting heating elements. Leaks often stem from loose connections or corrosion; tighten fittings and replace worn parts. Strange noises may indicate sediment buildup; flush the tank to resolve. Always refer to the manual for detailed troubleshooting steps before contacting a professional.
6.3 When to Call a Professional
For complex issues beyond basic troubleshooting, such as faulty electrical components or severe leaks, contact a licensed professional. If you’re unsure about repairs or lack expertise, professional assistance ensures safety and compliance with local codes. They can handle advanced diagnostics, venting adjustments, and critical system repairs, preventing further damage and ensuring optimal performance. Always prioritize safety by seeking expert help when needed.
Warranty and Support Information
This section outlines the warranty coverage, support resources, and additional materials available for your State Select Water Heater, ensuring comprehensive assistance and product understanding for optimal use.
7.1 Warranty Coverage Details
The State Select Water Heater is backed by a comprehensive warranty covering parts and labor for a specified period. The warranty begins upon installation and requires proper registration. Coverage includes repair or replacement of defective components, ensuring reliability and peace of mind. Compliance with installation and maintenance guidelines is essential for warranty validity. For detailed terms, refer to the provided documentation or contact customer support.
7.2 Contacting Customer Support
For assistance with your State Select Water Heater, contact customer support at 877-552-0010 or fax 615-792-2163. Visit their website for live chat, email support, and access to resources. Mailing address: 500 Tennessee Waltz Parkway, Ashland City, TN 37015. Utilize the Contractor Locator Tool to find certified installers. Online manuals, troubleshooting guides, and warranty info are also available to help resolve issues promptly and efficiently.
7.3 Accessing Additional Resources
Visit the official State Water Heaters website for comprehensive resources, including downloadable manuals, instructional videos, and product spec sheets. Explore tools like the water heater selector quiz and sizing guide to find the perfect model. Additionally, access rebates, incentives, and training programs like State Water Heaters University for ongoing education and support. Utilize the Living Zero Home Tour for eco-friendly insights and product demonstrations.
Technical Specifications
State Select water heaters offer varying capacities, energy-efficient designs, and comply with ANSI Z21.10.1-CSA 4.1 standards, ensuring reliable performance and safety while meeting regulatory requirements.
8.1 Dimensions and Weight
State Select water heaters vary in size and weight depending on the model. Typical dimensions range from 50 to 75 inches in height and 20 to 24 inches in diameter. Weights typically range between 150 to 400 pounds, ensuring sturdy installation while maintaining space efficiency. Specific models, such as the Select Power-Vent C3 (FVIR), may have slightly different measurements, so always refer to the manual for precise specifications.
8.2 Capacity and Efficiency Ratings
State Select water heaters offer varying capacities to meet different household needs, with first-hour ratings ranging from 60 to 100 gallons. Energy efficiency is prioritized, with energy factors (EF) up to 0.95 for gas models, ensuring high performance while reducing energy consumption. These ratings are designed to meet modern energy standards and provide reliable hot water delivery, making them suitable for both residential and light commercial applications.
8.4 Compliance and Certifications
State Select water heaters comply with ANSI Z21.10.1-CSA 4.1 standards for gas models, ensuring safe operation and flammable vapor ignition resistance. They meet federal and local energy efficiency regulations, qualifying for incentives. Certified designs adhere to installation requirements, including earthquake bracing in California. These certifications ensure reliability, safety, and environmental compliance, making them a trusted choice for residential and commercial use while meeting strict industry standards.
This manual guides you through optimal use, maintenance, and troubleshooting of your State Select Water Heater, ensuring safety, efficiency, and longevity. Follow guidelines for best performance.
9.1 Summary of Key Points
This manual provides comprehensive guidance for the State Select Water Heater, covering installation, operation, maintenance, and troubleshooting. It emphasizes safety, energy efficiency, and optimal performance. By following the instructions and recommendations outlined, users can ensure reliable operation and extend the heater’s lifespan. Regular maintenance and adherence to safety guidelines are crucial for maximizing efficiency and preventing potential issues. Refer to the manual for detailed procedures and warranty information.
9.2 Final Tips for Optimal Use
Regularly inspect and maintain your State Select Water Heater to ensure peak performance. Adjust temperature settings according to your needs to save energy. Monitor usage patterns to avoid overconsumption. Explore additional resources and support options provided by the manufacturer for troubleshooting and updates. By following these tips, you can maximize efficiency, extend the lifespan of your heater, and enjoy consistent hot water while keeping energy costs low.